Miller welder again

SVcummins

Well-known Member
Got the old miller running today first time in about 5 years she runs pretty good I Got the commutator rings polished up boy they were bad took quite a bit of time with the stones to get them shined up . Need to get a new starter as I broke the nose cone off .
Untitled URL Link
 
No i shut it off was going to go get some stuff to fix
the ground the cable and then it wouldn?t start then
I found out why. Thanks for the stones buy the way.
Next day off I?m going to get the starter off and get
the leads so they are ready to go I need to buy
some new leads these are pretty short but they will
work for a test
 
Thanks I?m hoping one day it will weld I tried
welding with it when I first got it but it wasn?t getting
enough juice to the leads
 

my onan/miller says the side covers need to be on, to cool properly. Still has the bright orange stickers on the sides.. Dont know if thats important or not.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top