goodguy

New User
I have a 4320 JD (2008) compact tractor w power reverser.

I am looking to add a front end loader to it. The newer ones are the JD H165 and H180 or the 400R, X or CX.

I am looking at a JD 58. Will that work for my tractor? How do I get the right brackets, if so?

Any thoughts on other loaders that will work. I do not need a great loader, just a functional one.

Thanks.
 
Unless there is another jd 58 loader I'm
unaware of then it doesn't stand a chance of
fitting. The 58 is meant for full sized 80-
100'ish hp tractors. I'd stick with the jd
loaders they recommend for your tractor.
Possibly look at Westendorf but they'll most
likely cost the same as a jd loader and not
fit as good. I would definitely get one
that's quick attach front. That way you can
switch out buckets or pallet forks easily.
 
See if JD still offers one and the brackets for your machine. You have to go through "whole goods" which is the tractor salesman.
After a few years they change everything and many times they don't offer them for older models.
 
Here's the chart I believe you are looking for:

https://www.muttonpower.com/t-non-current-john-deere-front-loader-tractor-compatibility.aspx
 
Thanks on all that. It seems that I have few choices and the JD is the way to go.

What do people think is the best USED market for any of these. They seem to be scarce as hen teeth!:)
 
It's going to be difficult finding a used
loader for that tractor. Most smaller
tractors that size that were bought with a
loader stay with the tractor. Makes the
resale value higher.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top