3020 wheels again

SVcummins

Well-known Member
The left side pinion was stuck a little tighter but the blue loader and John Deere breaker bar showed it who was boss
a261420.jpg

a261421.jpg

a261422.jpg
 
Wait until you twist that pinion off doing that. Then your in for real fun fixing it. LOL IF it is stuck that tight just take the lower wedge clear out and lower the axle and lean the hub to where you want it and put the wedge back in. I can do that while your fighting the pinion.
 
sv. in the top pic i'm looking at ringo and he has that "i'm going to supervise this job from waaay back here" look :lol: what could possibly go wrong??
 
I was afraid that was what was going to happen but I could get it move one way just not the other so I figured we'd give it a try luckily it worked. there was a bunch of junk in the rack right where the wheels was setting
 
I've had a 12 foot cheater on it before. The 1 3/8 socket has been replaced once and the breaker bar once under warranty the breaker bar broke with an 8 foot cheater and me and one other guy on the end of the cheater I've had the set since I was in high school .
 
Its A 3/4 inch drive I think I did tell them I used a cheater just not how big and how many guys were hanging on it .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top