It was a nice day so I though id start on the welder project fixed the broke off exhaust stack got the shields off and blew out all the dust I could . while i had the compressor going I thought I may as well see if I could get the bolts loose on the 3020 wheel hubs I've been soaking them since I bought the tractor with a jb 80 probably sprayed 6 cans on the wedges and what I could get to off the bolts. My half inch iimpact broke the bolts loose easily the bolts were wet when I when i pulled them out i tightened the Jack bolts down and smacked the three big bolts on each wedge with a sledge hammer and the wedges popped loose on both wheels