moonlite if you see this fella again ask him what kind of medication he's on, I'd like some :lol:(quoted from post at 18:28:33 01/10/18) When I ran a welding shop, we made tool boxes about like that. They were 17 inches long, 6 inches wide and deep, Lid had 1n turned down. John Deere fan said he did not need one because a JD never broke down and in the case one did, he only needed a pair of pliars
always at the bottom tangled up with at least 3 others, what would be a good size to build, sv has got me thinking about building one for my m5, I'm thinking about 10" wide, 20" long and about 6 or 8" deep, large enough to hold a hand pump grease gun, roll of rags, and some basic tools.(quoted from post at 21:28:51 01/10/18) The trouble with most tool boxes is they are to small. Have to pack everything in there just right to get the lid shut and then you have to dig everything out and balance it on the cab step to get that 9/16 wrench out and then try and fit it all back in just right. Ever notice the tool you need is always on the bottom?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy