This message is a reply to an archived post by sideconsole4020guy on January 11, 2014 at 16:19:19.
The original subject was "Wood fired tank heater".
I'm going to try to revive this thread. I have a
Siebring kerosene heater like some commenters
described. I've been trying to get it to work. It
won't pull a draft thru the chimney side. I
poured water thru it to make sure it isn't
blocked. Both pipes are the same height, about
28-30 inches. Do I need to add a piece of stove
pipe to the top of the chimney side to make it draw?
The original subject was "Wood fired tank heater".
I'm going to try to revive this thread. I have a
Siebring kerosene heater like some commenters
described. I've been trying to get it to work. It
won't pull a draft thru the chimney side. I
poured water thru it to make sure it isn't
blocked. Both pipes are the same height, about
28-30 inches. Do I need to add a piece of stove
pipe to the top of the chimney side to make it draw?