I have a 1965 John Deere 4020 that is all stock but it does have a loader. the loader controls are a Cross two spool system that is worn out and I'd like to replace it. Just wondering what products are out there and ill consider any recommendations you guys may have. I'd like my new system to handle the closed center system easily and not heat up my control as thats what my current one does from time to time. I have turned up the pressure screw on mine but over time it starts to hiss again and slowly heat up. Any suggestions please? I am all ears! thank you!
- Thread starter gqjoe
- Start date
You can easily find closed center valves that will work on your tractor. The pressure setting should be around 2200 PSI and the flow the valve would need to handle should be around 15 Gallons per minute. A valve that will do those two things will easily handle anything your tractor hydraulics can generate.
I personally would look for a valve with the joystick handle. I have become spoiled by them. A two lever valve just seems unhandy now.
I personally would look for a valve with the joystick handle. I have become spoiled by them. A two lever valve just seems unhandy now.
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Ditto what JD Seller stated.
Thank you everyone for your help! I'll do some searching now and see what I can find for a control valve that can handle those pressure and flow rates. I have seen a few pictures now of people who have added joysticks along side the fender and to be honest I like that idea too.
buickanddeere
Well-known Member
Supplied from scv or direct plumbed ?
buickanddeere
Well-known Member
Very good, did it right .
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy