Old tractor pulling new baler

pms

Member
Was able to try out my new inline baler.After running side pull balers my whole life I am sold on the inlines.Very consistent bales with minimal adustment.I like the knotter fan too...keeps that area of the baler clean.

Paul
a160804.jpg

a160805.jpg

a160806.jpg

a160807.jpg
 
Thanks for taking the time to take and post the pictures. What is the wiring on the right side of the bale chamber? I get the fan part but it looks like more than that.

Thanks again and enjoy.

Paul
 
nice looking hay, like the idea of the fan the knotters look like the ones on my MF120 baler except that the brake is on the opposite side. It likes plastic twine also
 
(quoted from post at 05:53:18 05/23/17) Thanks for taking the time to take and post the pictures. What is the wiring on the right side of the bale chamber? I get the fan part but it looks like more than that.

Thanks again and enjoy.

Paul

I bought a new round baler and it had a wiring harness for full rear tail lights when towing. Fortunately their were a couple of connectors so I could remove it easily.
 
Three relays wired to fan and the other wiring for front and rear work lights.Not sure why there is three relays serving fan...maybe to reverse fan.
Paul
 
Unless there is a stacker loading these I pity the guy Picking them off the ground. I had a guy do that one time as the wagon was not back yet. We let him pick them up he didn't do that again.
 
. You haven't lived until you baled with a JD 116 W now that was something to talk about I mean sware about. It would tip over backwards going up a steep hill and the wagon rack would hit the bale chamber when turning. Yes I can think of lots of reasons to like a Red baler even the old 77 NH wire tie was a lot better than that 116 JD wire tie.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top