The belt on my finish mower snapped today. I laid it out and measured 110" total length. That means the outside length is 110" right? And the inside would be shorter.
I found these guys: https://www.gprindustrial.com/en/2132-v-belts-classic-b-section/276-B107-classic-vbelt.html
$7 for a 110" belt seems astronomically cheap, but for $7 +$11 shipping, if it doesn't last I'm only out $18. Other belts I've seen are $40-50. I've never dealt with them and am not sure how they are, but their products seem fairly affordable.
They also have kevlar belts, which may be a better option for a few bucks more.
I found these guys: https://www.gprindustrial.com/en/2132-v-belts-classic-b-section/276-B107-classic-vbelt.html
$7 for a 110" belt seems astronomically cheap, but for $7 +$11 shipping, if it doesn't last I'm only out $18. Other belts I've seen are $40-50. I've never dealt with them and am not sure how they are, but their products seem fairly affordable.
They also have kevlar belts, which may be a better option for a few bucks more.