nickstyacich
New User
This message is a reply to an archived post by Dean on March 28, 2010 at 15:00:48.
The original subject was "Re: ford 801 power steering problems".
I have an 871 with power steering and bought a new pump. After installing the pump I am having trouble getting the banjo bolt that the pressure line attaches to not leak. I replaced the square O-ring and the round O-ring more than once on the bolt. I have also tried to Teflon tape the bolt with no success. Any help would be appreciated.
The original subject was "Re: ford 801 power steering problems".
I have an 871 with power steering and bought a new pump. After installing the pump I am having trouble getting the banjo bolt that the pressure line attaches to not leak. I replaced the square O-ring and the round O-ring more than once on the bolt. I have also tried to Teflon tape the bolt with no success. Any help would be appreciated.