(800) 853-2651
SHOP NOW

F 1 Danuser Auger

R

roaddevil49

Member
Have one that some one butchered the lower mounts by putting a 3pt draw bar across the gap ,this blocks the pto shafts range of motion when being lifted,making it unuseable.
Googled Danuser for a parts breakdown, not availabe ( too old I guess) . Any one in this brain trust have one, would be able to post some pictures of the lower mounting, or a parts diagram? Thanks Dane.
 
First call Danuser directly. I have always had excellent dealings with them. They DO make parts for just about anything they ever made. I sold a hitch saddle several years ago so it was available then. I do not remember the price.

Danuser Machine Company, Inc.
500 E. 3rd St.
P.O. Box 368
Fulton, MO 65251

Tel: (573) 642-2246
a232826.jpg
 
Thanks, JDseller,the one I have must be an early production model. The 3pt hitch system requires a 3rd link and has tierod ends at the gear box.I would post picture, but don 't have the where with all to do so. I will contact them to see if they can help.Dane.
 
Roaddevil,if you have the one I think you have ,most mounting parts aren't avalible,but Danuser has or makes a KIT to update yours.Those were made to only mount on Fords or Fergusons in the 40s-50 -early 60s and sold under the "DEARBORN" NAME.Call or write them and they can send you all the info needed to update yours.They were a 5 point mount,not 3 point.
 
Roaddevil here is a picture of the one I think you have. It would depend on how messed up the mount you have is weather I would fix it or replace it with a newer style bracket. I converted one 30 years ago for a fellow that bent the sliding tubes. I just cut the tubes about a foot lower than the top tie rods and welded the stubs into a cross frame. I then just copied making the newer style hitch. If you can cut and weld it is not hard to do. It does not have to have the complicated sliding mount like the original.

masset333 has it correct in that the old style was sold under the Dearborn name IRC.
a232890.jpg
 
You must log in or register to reply here.

Similar threads

H
Farmall "Irma" Model A: Customizing cultivator lif
Replies
12
Views
985
heinrick
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top