Gehl 3510 parts, help needed

Bradiniowa · Apr 27, 2016

Trying to tune up my Dad's snow pusher, a Gehl 3510 with a Ford 1.1 Industrial engine. The Gehl dealer I called said to go to Napa as they were no longer supporting the engine. The Napa dealer was of no help at all with out numbers to cross. So my question is does anyone have a service manual or link to some specs? Basically I would like to replace the ignition parts and set the valves. So far I have found numbers for the plugs and distributor cap but nothing else.

bg/mo · Apr 27, 2016

its wed nite,,,,if you can wait till tommorrow i have all the numbers you need in the shop,,,i will post them ,,I have one too 3510 gasser

Bradiniowa · Apr 27, 2016

Sounds good. Talked to a person at O'Rielly's tonight that did not know what points were?

oldtanker · Apr 27, 2016

(quoted from post at 20:06:50 04/27/16) Sounds good. Talked to a person at O'Rielly's tonight that did not know what points were?

Ain't a lot of point ignition systems out there anymore. I know a guy who graduated from an automotive program a few years ago. They did not cover carburation. He's learning about some now but it's hands on learning. I taught him how to adjust a quadra-jet last month.

Rick

Gambles · Apr 27, 2016

And they don't know how to start a carbureted car in cold weather, either.
There's lot of things they don't know how to do. About a month ago, I took my Ford Ranger pickup in to a tire shop to have new tires installed. There were about five "techs" working that day. I filled out all the paperwork, gave the employee my ignition key and my final question was this: "Does anybody here know how to drive a stick-shift?"
The answer I got: "Yep. We have Ralph over there drive in all vehicles that have a manual transmission."
"Ralph" looked like he was about 75 years old.

crawlerjohn · Apr 28, 2016

It is probably a Ford Valencia VSG 411 engine. That might help when referencing parts.

Duner Wi · Apr 28, 2016

germanbliss has an online parts manual for Gehl 3510
Helps to know your serial number.

bg/mo · Apr 28, 2016

ok here ya go ,,i dont remember the brand but these are the numbers i get at my napa store,,,,points are cs755,,,condenser is ep30,,cap is ep50 and rotor is ep49,,,,on mine the distrubuter number is 12100 motorcraft if i remember if you ever need a carb kit you will have to go to gehl cause the zenith book skips this carb

Bradiniowa · Apr 28, 2016

Thanks, I will try your numbers.

Gehl 3510 parts, help needed

Bradiniowa

Member

bg/mo

Member

Bradiniowa

Member

oldtanker

Well-known Member

Gambles

Well-known Member

crawlerjohn

Member

Duner Wi

Well-known Member

bg/mo

Member

Bradiniowa

Member

Similar threads