I have a few PT posts set in concrete that have snapped. It is not my place so I have limited options in replacement. I have
come up with three and would appreciate thoughts on each:
1) Jack the hole completely clean and reset new post in concrete.
2) Jack hole about 1 1/2- 2 feet done, set rebar into remaining concrete, pour new concrete and set a Simpson bracket able to
hold a new post.
3) Use a stud gun to set a plate into the concrete with a bracket attached for new post.
4) Other ideas/suggestions.
come up with three and would appreciate thoughts on each:
1) Jack the hole completely clean and reset new post in concrete.
2) Jack hole about 1 1/2- 2 feet done, set rebar into remaining concrete, pour new concrete and set a Simpson bracket able to
hold a new post.
3) Use a stud gun to set a plate into the concrete with a bracket attached for new post.
4) Other ideas/suggestions.