Northeast Puller
Member
I have a 25 year old turbo heater a Ready heat 1500 btu model.
It does not have a dent or scratch on it and has been trouble
free. Over the years I have taken the cover off and blown it
out with shop air and wiped down. So it is not gummed up.
Lately when it is running I get a chirping noise from it. Last
night it started hard and did not start and heard a humming
noise. I unplugged it and re plugged it in and the same thing.
On the third time it started just fine. I took the cover off to
see if maybe the fan was binding or something but did not find
anything and it was not dirty either. So does anyone have any
idea what the chirping noise and the hard start is about. It
does have all the original cover screws in place. So I do not
think the noise is from a lose cover.