OT Ford truck again

55 50 Ron · Dec 17, 2015

replacing a left front fender on a 91 F150. Need the spacers (maybe they're called a gaskets?) under the upper rear part of the fender between the fender and the cab mount bracket. Two pieces - each different thicknesses - together they measure about 1/4 inch.

Maybe could make one from really heavy gasket material.

Ideas? And thanks folks.

John_PA · Dec 17, 2015

They are called shims, and almost all jobbers sell them. It shouldn't be too hard to get them.

Allan in NE · Dec 18, 2015

What John said,

Body spacers.....any NAPA, etc. will have them.

Allan

Goose · Dec 18, 2015

They're called shims. HF has boxes of assortments for a few dollars. Otherwise, most any auto body supplier should have them.

OT Ford truck again

55 50 Ron

Well-known Member

John_PA

Well-known Member

Allan in NE

Well-known Member

Goose

Well-known Member

Similar threads