Hydraulic problem

John deere MT · Nov 23, 2015

When I try to lift hitch nothing happens. Levers dont have any tension when I try to raise hitch.fluid is full. Any ideas what's wrong?

coshoo · Nov 23, 2015

Sounds like the linkage from the lever to the hydraulic system may have come apart. Probably need to remove top cover and investigate.

Brendon-KS · Nov 23, 2015

I assume by your handle that the problem is on a Deere MT? If so, and if the dual Touch-o-Matic on the MT is similar to the single circuit system on the M, it might be the same problem I had once. Went to lift the hitch and the handle didn't feel or act like it was attached to anything anymore. In my case a roll pin had worked out which released the lever shaft from the internal linkage. It was fixable from the front once the cover was off.

John deere MT · Nov 23, 2015

Yes it's on an MT, Thank you I'll pull cover off and check that.

Hydraulic problem

John deere MT

Member

coshoo

Well-known Member

Brendon-KS

Well-known Member

John deere MT

Member

Similar threads