cylinder leaking

Geo-TH,In · Jul 28, 2015

Usually when a cylinder leaks, it needs now seals. So I took it in to be repaired. Well after installing it, I discovered it still leaked. I suspected the cylinder was cracked, so I applied 135 psi air pressure, didn't find a leak. The Hydraulic shop found it using 2000 psi. They welded it for me and didn't charge me, nice guys. I highly recommend the hydraulic shop on the south end of Terre Haute. They treat me right.

wilson ind · Jul 29, 2015

tested hydro for me no charge good folks

Geo-TH,In · Jul 30, 2015

Very good boys. Very close, on my way to town. I needed two 1/2 hoses 18 inches long, $35. Made them the same day.

The boys at terramite told me they can't rebuild the torque motor, so I bought a new one $740. Took my old unit to them. They think they can rebuild it. I told them no rush. Already have a new one.

Now I need to find new pins and bushing for backhoe bucket and boom. A lot of wear. I think I going to like the T5D over the T5C. Bigger front bucket, rear bucket, and tires. Plus someone put a honda engine on it instead of the kohler.

cylinder leaking

Geo-TH,In

Well-known Member

wilson ind

Well-known Member

Geo-TH,In

Well-known Member

Similar threads