zberninger
New User
So, i recently tried to do some preventative maintenance on my Long 460. After putting on new fuel filters, i bled the system according to the manual i found online.
During the process, i loosened the piston screw cap, on the bottom side of the injector pump, too much and the springs came out. There are three springs all of which are different sizes. I cannot find anything on their configuration. The two larger springs sit inside each other, but i am not sure what you do with the smallest one.
Can anyone point me in the right direction of a diagram or have an explanation for me? It has been two weeks of tinkering with no luck. Thank you for you time. Zach.
During the process, i loosened the piston screw cap, on the bottom side of the injector pump, too much and the springs came out. There are three springs all of which are different sizes. I cannot find anything on their configuration. The two larger springs sit inside each other, but i am not sure what you do with the smallest one.
Can anyone point me in the right direction of a diagram or have an explanation for me? It has been two weeks of tinkering with no luck. Thank you for you time. Zach.