OliverNate
Member
took the carb off my Oliver Cletrac OC46 to go through it and the brass ID tag is missing. I'm pretty sure is spose to have TSX 738 or TSX 791 (going by what it says in Zimmerman Cletrac parts book). This one has 227 458 cast into the flange where it bolts to the manifold. I did a search on these numbers and found an old post and from what I read the carb I have should be a TSX 662 or TSX 769. Just would like to know if this is right before I order a kit. Heres some pics of carb. I took some measurements with a caliper as well air filter side of carb is 1.86" and manifold side is 1.29" and bolt space is 2 11/16"
