Oliver 1650 Tractor Pull

greg oliver

Well-known Member
This is a tractor pull I had about: September 2012 with my Oliver 1650! It might have been slow but I got first place! This tractor pull took place in: Davenport Center, NY, it was taped by my wife and daughter. It is blurry because she had to tape it on the TV, this happened because of the old camera we taped it on. My daughter set it up and uploaded it, she is even typing it right now! Hope you enjoy the video! Click the link to watch it!
Untitled URL Link
 
Hi That tractor looks and sounds good.
Slow doesn't matter first second or thirds what counts on the day.
I have had my tractor weighted to the same classes as pro stocks and on sled settings for them. they were tuned to run 400hp low end and up. they went off the track after there class and we went straight after. something i learned pretty quick was 400+ hp that will run down the track at 30 +mph, is absolutely no good if you can't get it off the line or more than half way.
my tractors slower and 200 hp did a full pull that day and a few other times as well.
the prostock boys don't like that, a few others in my class put on good shows to.
so Don't be ashamed of anything that tractor does, you don't always need big money to win and have fun, some days money does make it easier though if all goes good L.O.L.
Regards Robert
 
rrlund, that was turned a little because the linkage was broken that I bought off ebay. The hood, engine, hydrapower, throttle linkage, air cleaner assembly all came from ebay or craigslist. The engine and hydropower only cost $400. All I did was basic tune up. That was 7500 lb class when I threw some weights on and moved up to 8500 lbs got my butt stomped. My daughter posted this video for me I have one more of the same tractor with a 283 diesel I want to show from back in 94. I drove it to the pull and it was about an hour and half away. Low power and low budget but fun. Greg
 
Thanks Robert now that I three tractors I'm trying to get my wife and daughter to go pulling but my daughter says its boring. It gets my blood pumping.LOL Greg
 
If you drive into Davenport Center the farm where the tractor pull was held is on the left if your coming from Oneonta. Fun time
 
Thanks Chuck, I just need to get it to run like yours but the wife keeps me on a tight budget. I'm going to try to post video from 1994 with same tractor with a 283 diesel pulling Doug Bull's sled. Greg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top