International b414

Jtodd · Dec 12, 2014

I have recently bought a b414. Nice old tractor and tough. Just recently I changed oil and hydraulic fluids. I cleaned the hyd filter and put it back in and now when I start my tractor my lifts raises about 1/2 way up regardless of my lift levers and draft control. Also checked my isolation valve below my seat. I put hytrans fluid back in as its called for. Anyone know what this may be???

tractorguy2 · Dec 12, 2014

I'm guessing air in the system.

Jtodd · Dec 12, 2014

i parked it on a pretty steep hill with the back end going uphill and it didn't help. Any other idea to vent air

J. Schwiebert · Dec 12, 2014

Did you check the fluid level after you started it? Do you have a book?

Jtodd · Dec 12, 2014

Fluid is good and no I don't have a book.

Wheatfarmer · Dec 12, 2014

I am working on a Ford 1910. Had it is the shop and the loader did the same thing except it was going all the way up and I got it shut off just is time and didn't hit the ceiling. It drifted back down and I bled the front loader hoses, then changed the oil. Working great.

International b414

Jtodd

New User

tractorguy2

Well-known Member

Jtodd

New User

J. Schwiebert

Well-known Member

Jtodd

New User

Wheatfarmer

Member

Similar threads