Oliver Super 77 tune up

Tractorcedric · Nov 27, 2014

Thought I would try and throw a pictures of my progress on here today. I have many things to be thankful for today, wife, health and country to name a few. Guess as in other post today I have gotten less social as getting older. Sure thankful that now I have the time and health to do what I like. Tend the wood stove and repair and old tractor. If your into Olivers note that I have put a clutch pedal from an 880 on this 77. Easier on left knee!

DeltaRed · Nov 27, 2014

I think that is just a bit more than a "tune up"! LOL

greg oliver · Nov 27, 2014

Are you going to make your own drawbar assembly? My brackets are broken that the bolts you had to drill out, thinking about using flat stock. I need your garage its on my wish list LOL. I got my starter rebuilt and dropped the carb off at a repair shop. Hope you have a good Thanksgiving. Greg

Tractorcedric · Nov 27, 2014

The bolts were broken off because it had a factory three point and it had been used with the bolts loose. I plan to repair that and put it back on.

JD Seller · Nov 27, 2014

That is a "real" TUNE UP!!! LOL You will know exactly what you have when your done this way.

Do you still have the three point setup for the tractor? I have not seen many Super 77s with a factory three point.

What front end do you have??? Wide or narrow. I always like how the wide front ends on the Olivers would turn just about as short as a narrow one would.

Tractorcedric · Nov 28, 2014

I do have a wide front to go on it.

Oliver Super 77 tune up

Tractorcedric

Member

DeltaRed

Well-known Member

greg oliver

Well-known Member

Tractorcedric

Member

JD Seller

Well-known Member

Tractorcedric

Member

Similar threads