Brockway tractor

Ol' Gimpy · Oct 23, 2014

Gentlemen! I need a rear axle for a Brockway 49-G tractor I just acquired. This is a later Brockway with the 8 bolt axle flange. I speaking with Mr. Brockway he informs me Brockway used their own axle,and he doesn"t have a source for it,he only has some transmission gears,etc. left. Any and all replies will be most helpful,thanks in advance!!

Dalex · Oct 23, 2014

That tractor is so rare ! Can you post some pix ? If you can find an axle with the correct spline , you could get the flange machined to your spec's....Or vice versa .

Ol' Gimpy · Oct 23, 2014

If I can figure out how to forward a picture I have-"Computer Challenged" so to speak-I had hopes! Brockway may have used a vendor built axle,but not to be,according to Mr. Brockway. That option may well be what I wind up doing,this one failed at the bull gear. At least the bull gear wasn"t damaged,looks like a possible stress fracture. Guess the previous owner gave up trying to locate one,how I was able to buy it.

caterpillar guy · Oct 24, 2014

Ol'Gimpy

Have you tried a Mack dealer for your axle. It seems that they were acquired by Mack For a while before closing the doors for good. According to the history of Brockway. There is a good read on the company if you do a search for the web site .

Bob N.Y. · Oct 24, 2014

I think he is talking about a Brockway farm tractor which is no relation to the Brockway trucks.

Brockway tractor

Ol' Gimpy

Member

Dalex

Well-known Member

Ol' Gimpy

Member

caterpillar guy

Well-known Member

Bob N.Y.

Well-known Member

Similar threads