cutting cast

brandon j · Jun 9, 2014

What do you guys use to cut cast I need to cut about 1inch thick maybe a foot long thanks for your help

DeltaRed · Jun 9, 2014

Sawzall,grinder....

Bob · Jun 10, 2014

Plasma cutter.

Anonymous-0 · Jun 10, 2014

If it's easy to get at, a zip disc in an angle grinder would be about the cheapest way. Would take a little while but not bad with a HD 6" or 7" grinder. Wouldn't attempt it with a smaller grinder.

Stephen Newell · Jun 10, 2014

You could cut it with a circular saw with a metal cutting carborundum blade.

IH2444 · Jun 10, 2014

A vibratory tool. Would cut the cast but not you.

Geo-TH,In · Jun 10, 2014

I have a metal band saw, think it should cut it with the right blade.

Don-Wi · Jun 10, 2014

I've cut through a 2" thick section of a junk transmission housing with a sawzall and a coarse wood blade and I ran it slow.

Cast iron is easy to cut.

Donovan from Wisconsin

Ultradog MN · Jun 10, 2014

Cast iron cuts easy with an abrasive wheel.

Tramway Guy · Jun 10, 2014

Water Jet.

cutting cast

brandon j

Member

DeltaRed

Well-known Member

Bob

Well-known Member

Anonymous-0

Well-known Member

Stephen Newell

Well-known Member

IH2444

Well-known Member

Geo-TH,In

Well-known Member

Don-Wi

Well-known Member

Ultradog MN

Well-known Member

Tramway Guy

Well-known Member

Similar threads