used oil stove

mnoliverguy · Feb 17, 2013

Any body remember how to make one of those old style drip type used oil burners? any Ideas?

Anonymous-0 · Feb 17, 2013

A couple years ago I Googled/printed some good plans. Pretty simple concept.

Glenn F.

JD Seller · Feb 17, 2013

I made several years ago. I just put a flat plate toward the top of a wood stove. I used copper tubing shaped to drip the oil in the middle of the plate. I controlled the flow with just a common gate valve. I just had a smaller tank that would gravity flow the system.

It was more of a supplement heat than a main source type. You usually had to have the stove good and hot with wood then turn the oil drip on. If you did not have it good and hot it would just smoke a lot an not put out much heat. Used oil will not burn that well straight. It is more of a smoldering type of fire.

gtractorfan · Feb 17, 2013

What I started doing a few years ago is pouring a little used oil at a time over firewood that's in a bin out of the weather with a good bottom. I never pour out enough at a time that the oil runs to the bottom anyhow. After a short while the oil soaks into the wood so it's not messy and adds a bit to the fire.

used oil stove

mnoliverguy

Member

Anonymous-0

Well-known Member

JD Seller

Well-known Member

gtractorfan

Well-known Member

Similar threads