Massey 165 Aux Hydraulics

rust-o

Member
Hi, I recently bought a Massey 165 that didnt have Aux Hydaulics and being that i plan on running a haybine i needed hydaulics on it. So i bought a kit for putting hydaulics on it. It came today but didnt have any directions for installation. I didnt figure i would need instructions for mounting the valve, but i wasnt sure if it was neccesary to bleed the hoses etc.
Does anybody have any tips for doing this?
anything in particular i need to know to do this?

hoping to work on it tomorow so any advice is greatly appreciated!
Also how much Hydraulic fluid is needed to raise the level from add to full?
THANKS!
 
I have a manual some where around here on aux hyd systems on the MF tractors so if you find you end up with a problem just ask and I will try to find it and look it up. That said as for bleeding the hyds they should do it on there own when you hook it up and use them
 
(quoted from post at 16:07:53 01/25/13) I have a manual some where around here on aux hyd systems on the MF tractors so if you find you end up with a problem just ask and I will try to find it and look it up. That said as for bleeding the hyds they should do it on there own when you hook it up and use them

Hey Thanks, I'll keep that manual in mind as I work on it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top