Hendrik
Member
The Fiat 124 Spider I bought last year has an add on oil cooler for the auto transmission.
<a href="http://s723.beta.photobucket.com/user/farmallholder/media/Ferrari/IMG_0348_zps3231aa5d.jpg.html" target="_blank">
</a>
Would like to mount this cooler a little better. It sits between the grill and the radiator (engine coolant cooler). In the pic the radiator is removed.
The overall dimensions are approximately 13 by 5 by 0.75 inches.
Since the cooler has no mounting ears, I am thinking of a rubber strap looped through each of the three U bends in the pipe and attached to a vertical post to be mounted between the cross members below and above the cooler.
Open to your learned and practical suggestions!
Appreciate your help, Hendrik
<a href="http://s723.beta.photobucket.com/user/farmallholder/media/Ferrari/IMG_0348_zps3231aa5d.jpg.html" target="_blank">
Would like to mount this cooler a little better. It sits between the grill and the radiator (engine coolant cooler). In the pic the radiator is removed.
The overall dimensions are approximately 13 by 5 by 0.75 inches.
Since the cooler has no mounting ears, I am thinking of a rubber strap looped through each of the three U bends in the pipe and attached to a vertical post to be mounted between the cross members below and above the cooler.
Open to your learned and practical suggestions!
Appreciate your help, Hendrik