1, Take out the Plug 2, remove valve pan cover 3, turn engine (clockwise) by Hand till it comes up on compression stroke 4, then keep turning so the piston drops 1/4 " past top dead center
5, Adjust both valves to 0.04
many vids out there , but I don't agree with them.
some or most will say just open the exhaust valve first and adjust intake, the turn engine so the intake is open and adjust the exhaust ?? My theory is If the exhaust valve was too loose when any adjustment was made,then the setting for the intake would be off Although this is for a Briggs,adjustments should be the same .Both have ARC (Automatic Compression Realeases)