Author	[Modern View]
rrlund 01-03-2013 16:56:06 207.241.137.116 Report to Moderator	And if you only need a tractor that big to run,say,a chopper and a chisel plow,but it's too big for the planter,grain drill,sprayer,haybine,round baler,grinder mixer and manure spreader,what's the point praying at the alter of the Deere and spending $30,000 for the same power to do a few jobs? Once the silo is filled and the tractor is just sitting in the shed the rest of the year,as long as the cattle are eating,it doesn't matter what put the feed there. And as far as the whole "I can get parts for Deere",well good for anybody who says so. Mother Deere left some huge holes in her new improved dealer network though and I'm dead center in the middle of one. If you want to be broke down for a week to ten days,break something green and yellow around here. [Reply]   [No Email]
dboll 01-04-2013 18:40:21 209.23.168.165 Report to Moderator	Re: No Cheap Horsepower in reply to rrlund, 01-03-2013 16:56:06   as long as you can get enough dsl. fuel for a deere, the 30/40 series had atrocious fuel consumption and no low end torque [Reply]  [No Email]
Robert major 01-04-2013 11:50:39 216.81.17.43 Report to Moderator	Re: No Cheap Horsepower in reply to rrlund, 01-03-2013 16:56:06   Hi It don"t matter if it"s Deere or Agco equipment round us the parts system is messed up right from the Manufacturers. we have plenty of independant not all one group dealers for both, and still a pain in the A#$ to get some stuff. Regards Robert [Reply]  [No Email]