My son picked up a JD 620 a few weeks ago. It"s a nice tractor and in good condition. It has original paint and good tires. It came with a 45 loader with a snow plow. Where can I find a bucket for it; also a owners book? I have a shop manual, but an owners manual would be most helpful. Thanks Ed
 
I have a 45 loader I would like to sell.Complete with bucket, cylinders and mounting brackets Cell is 812-797-7606. I am in Lawrence county In.
 
Tractor dealer near me has about a hundred buckets setting on the lot for sale.
Just the buckets. Maybe off bent up loader frames?
You may want to look around at some of your local dealers.
 
Nearly impossible to find just a bucket due to wear. Get a pic of one and take measurements of your loader and have your local machine shop make one. If you was close I'd say get Lanse of Tool Talk to make it.

I had Gross Machine Shop of Westphalia, Mi make a bucket for my NH skidsteer. It is better than NH would have had.
 
Congratulations, the 620 is the best version of the A ever built.
1-800-522-7448 for the operators and service manuals. The parts manual is online at the JD web site. Stay away from the IT manuals, they contain just enough info to get into trouble.
Those two cylinders prefer Autolote 3116 plugs. Make sure somebody didn't remove the thermostat or install a stat that operates below 180F. Carb adjustments are important. Some folk set them for smoothest operation which is over rich. The idle and mains should be set for as lean as possible operation without bogging or missing.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top