Author	[Modern View]
330 Standard 12-12-2012 06:40:35 12.22.180.2 Report to Moderator	Okay here is a reply so you all have more information to work with. The engine does not stall. It keeps running just fine. The tractor just quits moving. Believe me this hill is very slight. really almost no hill at all. All I have used this tractor for since i got it was raking hay and pulling a 16 ft trailer around the farm loading junk to be hauled however the last 2 loads of junk were heavy loads and it pulled just fine on relatively level hard ground. I realize high gear is road gear and would not pull a hay ride that fast but this tractor would not pull itself if I was moving it from field to field.I have been pulling this shuttle with a 43' JD A in 5 th gear and it is about the right speed for the 3 mile round trip. The lower H gears that this tractor will pull in will be way too slow for the traffic. This is really more of a people mover at the festival than a hay ride. I would just like to use the H because it is electric starting and to do something different. So any ideas? [Reply]   [No Email]
Paul from MN 12-12-2012 08:27:39 206.47.208.114 Report to Moderator	Re: Farmall H won't pull in reply to 330 Standard, 12-12-2012 06:40:35   Quoting Removed, click Modern View to see What you are describing is either a clutch that is worn out or in great need of adjustment. [Reply]  [No Email]
showcrop 12-12-2012 07:35:15 75.67.231.80 Report to Moderator	Re: Farmall H won't pull in reply to 330 Standard, 12-12-2012 06:40:35   Quoting Removed, click Modern View to see If what you are stating can be interpreted as "Engine RPMs do not drop off but tractor slows way down" the problem is the clutchs. [Reply]  [No Email]
PJH 12-12-2012 07:23:12 50.40.254.45 Report to Moderator	Re: Farmall H won't pull in reply to 330 Standard, 12-12-2012 06:40:35   You said, "The engine does not stall. It keeps running just fine. The tractor just quits moving." Your clutch is probably shot, or at the very least needs adjustment. [Reply]  [No Email]