Taking apart the carburetor this evening from my MF TO-35 and the air screw was so tight that it snapped off when I tried to take it out.
I tried with easy outs and it wouldn't budge. I drilled it out a little further and tried to knock the sides in and pull the rest out but I don't want to go too far for fear I might strip the threads.
It is currently soaking in carb cleaner which I'm hoping might loosen things up.
Any other tricks?
I tried with easy outs and it wouldn't budge. I drilled it out a little further and tried to knock the sides in and pull the rest out but I don't want to go too far for fear I might strip the threads.
It is currently soaking in carb cleaner which I'm hoping might loosen things up.
Any other tricks?