60's model Massey Ferguson 65

Eli McKeehan · Apr 11, 2012

Tractor worked great.. one day I went to depress the clutch and tractor continue to pull.. clutch will not dis engage pedal has no resistance I tried adjusting rods and nothing changed please help

Dieseltech · Apr 11, 2012

Remove inspection plate below clutch, see if release bearing still turns OK or is locked up, may have worn away release adjusting bolts and levers if bearing is bad. Has it been noisy lately? If you are lucky cast arm clamp may have slipped on release shaft and needs reset.

Anonymous-0 · Apr 12, 2012

It sound like the throw out bearing went out and wore down the adjusting screw on the clucth finger. It happens in the blink of an eye. Pull the inspection plate off the bottom of the bell housing you should be able to see the clutch finger.

Eli McKeehan · Apr 12, 2012

Ok.. Thankyou

Eli McKeehan · Apr 12, 2012

Do I have to split tractor to fix?

Anonymous-0 · Apr 12, 2012

Eli McKeehan · Apr 12, 2012

I do got to split it? Tell me your pulling my leg

Anonymous-0 · Apr 13, 2012

(quoted from post at 21:38:00 04/12/12) I do got to split it? Tell me your pulling my leg

Well, if you can find any other way, you'll be the first.

60's model Massey Ferguson 65

Eli McKeehan

New User

Dieseltech

Well-known Member

Anonymous-0

Well-known Member

Eli McKeehan

New User

Eli McKeehan

New User

Anonymous-0

Well-known Member

Eli McKeehan

New User

Anonymous-0

Well-known Member

Similar threads