6910 air conditioner capacity

Anonymous-0 · Sep 24, 2011

I found the leak and was wondering if anyone had the freon and oil capacity for R134 in a JD 6910 Air Conditioner.

rexhellwig · Sep 24, 2011

I have a specification chart for this AC, but not much else.

It calls for 83 oz. of refrigerant and 11 total oz. of refrigerant oil. Quantities stay the same for R12 or R134a.

R12 must use mineral oil.

R134A will need PAG 46 oil assuming a japanese compressor is being used.

Allan in NE · Sep 24, 2011

Where was the leak?

Allan

Owen Aaland · Sep 24, 2011

That's kind of unusual for both R12 and R134A to take the same amount of refrigerant. Usually R134A calls for about 80% of the amount used instead of R12.

Tx Jim · Sep 24, 2011

(quoted from post at 11:23:43 09/24/11) That's kind of unusual for both R12 and R134A to take the same amount of refrigerant. Usually R134A calls for about 80% of the amount used instead of R12.

I agree 80% 134A vs R12 is the general rule.

Anonymous-0 · Sep 24, 2011

the leak was in the low pressure side line. right where the line hooks to the compressor it was rubbing on the frame and it rubbed a hole. the hose is coming in monday.

6910 air conditioner capacity

Anonymous-0

Well-known Member

rexhellwig

Member

Allan in NE

Well-known Member

Owen Aaland

Well-known Member

Tx Jim

Well-known Member

Anonymous-0

Well-known Member

Similar threads