vac case side belt pulley pto shield w/bracket

Am looking for a used side belt pulley and a used pto shield with bracket that fits a vac case.

Saw someone that was parting out a vac but had sold the pulley so I'm still looking.

I have a pair of Case VAC parts tractors. My e-mail is open as always just let me know if you do not find what you need I may have the parts here

I have the belt pulley that has the hyd pump in it. Is this the right one?

I have seen quite a few VAC tractors over the years, but I have never seen a shield for the belt pulley on any of them.

I suppose such a shield would be a good idea, since the belt pulley turned whenever the clutch pedal was out on our old VAC when I was growing up. That was just how it worked, and we never thought much about it. We used that belt pulley a few times, to operate an old buzz saw that was on our place. The buzz saw seemed many times more dangerous than the belt pulley did, and my Dad would not let me go near it. I imagine that the moving belt or pulley could have caused horrible damage too, it someone happened to get tangled in it, but no one ever did. We cut a lot of firewood quick with that buzz saw. But then we got a good chain saw and never used the buzz saw again.

Maybe you could fabricate a shield for the belt pulley. If I was building one, I would make it pretty stout, since someone might try to use it for a step to get up on the tractor. Have you ever seen a photo of a factory shield? If I have, I sure don't remember what it looked like. Good luck, and enjoy your VAC. I spent a bunch of my childhood on ours and regret that I ever let it get away from me.

Thanks, but i was talking about a shield for the PTO. I would also like to find a pulley for my VAC.

Yes, but i don't need the whole assy, only the pulley.

I'm looking for just the pulley that runs off the attachment that also has the powerlift pump.
Also for the shield that fits over the PTO. I have the tube cover that fits over the PTO shaft but would like the shield also.
Thanks,
Kermit

Well as I said e-mail; is open and always is. I know I have the pulley since O walked by it today and yes it has the hyds pump as part of it. As for the PTO shield I do not know I did not walk behind the parts tractor but again e-mail is batter then on the site