Topic: Re: Load binder: ratcheting vs. non ratcheting|
[Show Entire Topic] [Return to Forum]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
Quoting Removed, click Modern View to see
If the machine or implement is on rubber tires, I like the over center type because I can actually get the tires to "squish", and then I KNOW it won't go anywhere. I do use a 4 foot cheater on the handle.
If the implement is NOT on tires, then the ratcheting type is the only choice, or even better is a ratcheting strap.
[Reply] [No Email]|
| I'm different I guess, I like the over-centre type, but I don't use a |
cheater pipe because I'm the guy that has to undo them too. With
cheater you can watch guys half pulling their trailer apart chaining
stuff down. On a rough road and a long trailer you can break stuff
doing that. Instead I chain my loads so they aren't going to slack
up much, recheck early in the trip and always wire the handles
I've used the ratchet type hauling excavators but they get so rusty
up here in the winter salt its a pain.
[Reply] [No Email]|
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.|