hauling a Case DC

Flewster · Jul 25, 2011

I will be hauling a Case DC 215 miles this friday. Never transported a tractor before. Anyone got good advise or pictures on the way to tie it down? Thanks

Anonymous-0 · Jul 25, 2011

If it's a narrow front, I do the front this way:
Look underneath the casting the radiator sits on; you will see 2 parallel pieces with holes directly
across from each other. Take a clevis and pin and put it there and run your front chain through the clevis.
For the back, I go around the corners of the drawbar frame with my chains. I do not recommend a clevis on the drawbar itself; in fact, I have heard that that is illegal.

Flewster · Jul 25, 2011

(quoted from post at 15:07:47 07/25/11) If it's a narrow front, I do the front this way:
Look underneath the casting the radiator sits on; you will see 2 parallel pieces with holes directly
across from each other. Take a clevis and pin and put it there and run your front chain through the clevis.
For the back, I go around the corners of the drawbar frame with my chains. I do not recommend a clevis on the drawbar itself; in fact, I have heard that that is illegal.

Thank you.

Flewster · Jul 28, 2011

Installed chains on the rear as you described and then put the clevis in the front and installed a heavy duty 10,000 pound strap up there. Headed out in the morning. 16 foot dual axle trailer. put rear axle of tractor over rear axle of trailer. Just a bit of weight on tongue.

hauling a Case DC

Flewster

Member

Anonymous-0

Well-known Member

Flewster

Member

Flewster

Member

Similar threads