caterpillar guy
Well-known Member
This message is a reply to an archived post by WFE270NWIA on April 12, 2014 at 14:50:53.
The original subject was "Hauling vehicles".
For the DC and an SC the guy I haul his SC each year to the Bridge crossing, has put a square shaft piece in the front where those clamps are by the front wheels then welded a loop on them. I hook there. Most guys I haul for already have some method on the tractor for the front ends. If not and it is in it's work clothes, I just hook right in between the front tires around the pedestal and tighten her up pulling forward she can't turn that way and is held solid.
The original subject was "Hauling vehicles".
For the DC and an SC the guy I haul his SC each year to the Bridge crossing, has put a square shaft piece in the front where those clamps are by the front wheels then welded a loop on them. I hook there. Most guys I haul for already have some method on the tractor for the front ends. If not and it is in it's work clothes, I just hook right in between the front tires around the pedestal and tighten her up pulling forward she can't turn that way and is held solid.