TABLE SAW ANTIQUE

Jack345 · Sep 9, 2018

I have an old 4" wide flat belt driven table saw. The table has a fence will & tilt for angle cuts & will take up to a 20inch blade.Made by DUREX Chicago , model no 5. Its big, heavy & may have been used on building site its on factory skids, motor/engine can be mounted on frame between skids. Searched for info but nothing comes up on DUREX anyone have info? Thanks

Logan in SE Texas · Sep 10, 2018

WOW! Neat old tool. If it could only talk.

Bret4207 · Sep 10, 2018

You might try Vintagemachinery.org I took a quick look and didn't see Durex listed, but they may have something there if you look around.

1948CaseVAI · Sep 10, 2018

(quoted from post at 08:52:15 09/10/18)
You might try Vintagemachinery.org I took a quick look and didn't see Durex listed, but they may have something there if you look around.

X2 for vintagemachinery.org! If you do not see a listing there or you want more info go ahead and email Keith Rucker who runs the site (there shouod be a contact form). He runs a youtube channel and is an active volunteer at the Georgia Museum of Agriculture and he will be interested. Nice machine!

Steve@Advance · Sep 10, 2018

Maybe CBBC down below will sell you his motor, put it back to work!

Jack345 · Sep 11, 2018

Yeah, thats a good idea! With a 20 inch blade think this old saw would be good for sawing logs. Tried searches & nothing showed up on DUREX...may have been bought out by some other company or was never big enough to rate getting into books, its built to last.

TABLE SAW ANTIQUE

Jack345

Member

Logan in SE Texas

Member

Bret4207

Well-known Member

1948CaseVAI

Well-known Member

Steve@Advance

Well-known Member

Jack345

Member

Similar threads