Billy Shafer

Angle Iron · Sep 5, 2018

Need another favor if possible. A Miller bobcat welder with a Onan P220GIOHV-2252A engine is coming to my garage. Is there an online source for a manual for this unit like the other one you told me about? I will have it here in the next 4-5 days or so to look at. From what I am told it ran well but has set un-started for several years. It may be just fine with a drain and flush of the tank and carb. I do not think so but it could be. It belongs to a family friend.
Thanks for now.

Billy Shafer · Sep 5, 2018

Go to the Twinslan Onan manual post #4. It has the link to the manuals.

965-0153 Onan/Miller operator service manual.

965-0762 Onan engine service manual.

I will check for more Miller manuals. But I think those two will get you what you need.

Billy Shafer · Sep 5, 2018

That should be 965-0163. Fat fingers hit the wrong button.

Angle Iron · Sep 6, 2018

(quoted from post at 19:12:00 09/05/18) That should be 965-0163. Fat fingers hit the wrong button.

hank you again, This will be of great help to me I am sure.

Billy Shafer

Angle Iron

Member

Billy Shafer

Well-known Member

Billy Shafer

Well-known Member

Angle Iron

Member

Similar threads