A while back I posted asking if anyone knew a source for hex ID washers. Never did come up with a source for a small quantity. Someone suggested cutting up a socket, which gave me the idea to cut up a mild steel 9/16" hex coupler. Found one at Shoups (of all places), and chopped two .25" sections off in the lathe. (3/16" would have been thick enough, but what the heck!)
Problem solved!
<img src = "http://oi68.tinypic.com/2638txs.jpg">
<img src = "http://oi68.tinypic.com/f0vk2v.jpg">
<img src = "http://oi67.tinypic.com/2hziyp5.jpg">
Previous thread
Problem solved!
<img src = "http://oi68.tinypic.com/2638txs.jpg">
<img src = "http://oi68.tinypic.com/f0vk2v.jpg">
<img src = "http://oi67.tinypic.com/2hziyp5.jpg">
Previous thread