No feed Miller MIG

Bad control switch at the handle will do that as will a bad wire from the switch to the motor. Back in the late 80s I worked at Tracker Marine and fixed those type of problems all the time. Open up the handle and pull the wires of the switch and hook them to each other and turn it on. If you have then bad switch is still no feed work you way back
 
I have a Miller 175 and on occasion the wire has not fed. I've found that you need to remove the sleeve from time to time and blow out the debris from the wire.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top