I have a Puma similar to the one pictured. It works okay for the home shop. I use mine strictly for my paint both. It it will keep up with my paint gun just fine. It would not keep up with any real air hogs like a blast cabinet. The only compliant that I have is the drain bung is 1/8" pipe and it is hard to get too. I added a short nipple, elbow and a longer nipple and moved the valve out two where I could get to it better. I had another compressor that had an 1/8" bung and it would not drain real well. It finally plugged up and I scrapped it. The replacement compressor has a 1/2" NPT bung so it really will drain.