Hi everyone. I want to build a direct drive hydraulic post hole digger to use on my very old skid steer. Home Depot rents towable units (Ground Hog brand) that just use a hydraulic motor to power the auger, no gear box, direct drive. I want to do a similar setup. My skid steer has auxiliary hookups (never used them) Thinking about getting an ebay hydraulic motor, 1" shaft, about 23 cubic inch displacement. 10 feet 1/2" hoses. Thinking about mounting the motor to a steel plate, weld a piece of 6" pipe about a foot long to plate (enclosing motor) then rig up a swivel at top of pipe, attach to bucket. Will it work? Thoughts? Thanks