I'm wanting to build a jig this winter to help build gates for the cattle yards. I'm previous years I've used an old gate as a pattern,but I would like to build a jig instead to make the process a little easier and quicker.
Wondered about using lumber, maybe a subframe of 2x4 and then some 1x6 ripped in half to 1x3 to hold the steel in place. Just need to get it tacked to stop everything moving, the I can weld it up out of the jig.
Looking for ideas, thanks in advance.
Wondered about using lumber, maybe a subframe of 2x4 and then some 1x6 ripped in half to 1x3 to hold the steel in place. Just need to get it tacked to stop everything moving, the I can weld it up out of the jig.
Looking for ideas, thanks in advance.