the old harrow

larry@stinescorner

Well-known Member
you might remember,a friend of mine gave me a three pt harrow. the one tooth on the back right side was bent.I took it off ,since tractor supply is not far from us here in NJ,thought Iwould aske if they had or could get one.They looked at me like I was Red Headed stepchild,,,lol ...My friend Jim G ,stopped by and saw the tooth in the back of my truck,He said,,put it back on.,Then,he got a pipewrench and a cheater pipe.He bent it back in shape with slow even pressure.Its bent back to original shape now.I will be using the harrow when I plow the big garden...Thanks Jim G!!!
46022.jpg
46023.jpg[
 
Your picture reminded me of this old Poloroid of my dad getting ready to hook up behind the disc in backround. Those teeth were a dime a dozen back then, I used one to attach the seat on my sulky. Hope the picture is big enough to see, it's small in the preview.
a152560.jpg
 
I blew your picture up a little...I've got one sitting behind the disc right now, just too cold and windy to go out and take a picture, and no, I'm not going to paint it blue.
a152562.jpg
 
Thanks for making it big, lately we've been having computer issues and today the printer/scanner didn't want to do its thing, (would print but not scan). Finally with plenty of cajoling it made the little picture. I tried making it bigger with no success, don't know why it scanned so small.
 
I may try to spray it,I did buy a paint sprayer for 5 dollars at the flea,,and a friend gave me a compressor,,I got the regulator and water trap at HF,i may try it when its warm and not windy one day,Can rustoleum be sprayed? What would you use for thinner with rustoleum?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top