Dave Sherburne, NY
Member
I picked up a large metal cutting bandsaw at an auction last year. This is a large saw, about an 80" blade maybe larger. I bought a blade for it and it was working fine till last week. Now the switch doesn't work any more. It's one of those saws where the frame lifts up you clamp the metal in the vise, pull the switch on and lower the blace onto the piece you want cut and after the piece is cut thru, the frame comes down and touches the switch and pushes it off. The switch that's on it now looks just like a tractor head lite switch. I'd like to find a switch the could handle the amps better. Any Ideas