The Famous Grouse
Member
Freud Steel Demon circular saw blade. Buy one now. Thank me later. I busted my buttski trying to get clean cuts other ways and it never even dawned on me that there was an exactly right tool for the job and all I needed was the right blade for it.
http://www.amazon.com/D0748F-Diablo...459969357&sr=8-2&keywords=steel+demon
Wear hearing and eye protection!
This produces a clean, burr-free cut with minimal heat and paint damage to the edge. Cut with the finished side of the steel DOWN. Make a 4 foot zero clearance rail guide out of a piece of masonite before you start. Each cut will then take about 20 seconds.
Grouse
http://www.amazon.com/D0748F-Diablo...459969357&sr=8-2&keywords=steel+demon
Wear hearing and eye protection!
This produces a clean, burr-free cut with minimal heat and paint damage to the edge. Cut with the finished side of the steel DOWN. Make a 4 foot zero clearance rail guide out of a piece of masonite before you start. Each cut will then take about 20 seconds.
Grouse