Homelite Super XL chainsaw bar

biggerred

Member
The bar split at the end of my old saw and I'm having a hard time finding a replacement. I bought the "should fit" bars but they won't fit over the mounting studs. Here's all the numbers that's stamped on the old bar. Can anyone decipher them?
a205261.jpg
 

http://www.baileysonline.com/Chainsaw-Bars/Professional-Sprocket-Nose-Guide-Bars/Oregon-Chainsaw-Bars/Oregon-Pro-Lite-Guide-Bars/Oregon-20-Pro-Lite-Guard-Mate-Chainsaw-Bar-70-Drive-Links-200GLHD196.axd

http://www.ebay.com/itm/HOMELITE-CHAINSAW-BAR-20-GW-20001-G5-FITS-MODEL-330-360-XL12-SUPER-XL-EZ-/272014189358?hash=item3f554f232e:g:qYoAAOSwI-BWG87C

http://www.jackssmallengines.com/equipment/homelite/chainsaw/chainsaw-bars
 
(quoted from post at 14:16:43 11/07/15) The bar split at the end of my old saw and I'm having a hard time finding a replacement. I bought the "should fit" bars but they won't fit over the mounting studs. Here's all the numbers that's stamped on the old bar. Can anyone decipher them?
a205261.jpg

As far as that particular bar, if my memory is any good, it's a 20 inch, 3/8" pitch and the mount pattern designation for that company (who ever made it) is G5. The 043? I don't know. It's not the number of links or gauge.[/i]
 
A few years ago my nephew put a Stihl 32" bar on his Homelite Super Xl 925 with some modification. The Stihl bar actually cut better than the Homelite. The Stihl bar was a roller nose.
 
Though I cannot help with an answer to your specific question, I have a good Homelite (Super?) XL-(?) saw (the blue one) with a nearly new Homelite 20" bar and chain along with another brand new unused Oregon chain with it.

I stopped using it when I bought a Stihl some time ago.

The recoil needs work (again) and I would sell it reasonably to anyone who can use it.

Dean
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top