haroldwcrosby
New User
I have a Yanmar 336. which is similar to a JD 1050.
While changing the Hydrolic fluid I was shocked to find three bolts sheared off ., and a triangle shaped plate in the bottom of the rear end housing .
So those hold the bull gear to the axle, we have removed the housing off the tractor , but we need to remove the axle ,any idea on how to remove axle from housing?.
While changing the Hydrolic fluid I was shocked to find three bolts sheared off ., and a triangle shaped plate in the bottom of the rear end housing .
So those hold the bull gear to the axle, we have removed the housing off the tractor , but we need to remove the axle ,any idea on how to remove axle from housing?.
